No Man’s Sky Screen Tearing on PS4, PS5, or Xbox One, Series X/S: “No Man’s Sky, a survival game centered around exploration, was developed and published by Hello Games in August 2016. It is accessible on PlayStation 4, Xbox One, and Microsoft Windows.
This action-adventure survival title features four distinct gameplay modes: exploration, survival, combat, and trading. Unfortunately, players have reported encountering screen tearing issues on PS4, PS5, and Xbox consoles, which can be quite frustrating.
If you’re experiencing similar screen flickering or tearing issues, this troubleshooting guide will provide you with the necessary steps to resolve them.
Such graphical problems are prevalent among gamers, regardless of whether they are on PC or console. In this case, players may notice visual glitches or shimmering effects that disrupt the overall gameplay experience.”
Fix: No Man’s Sky Screen Tearing on PS4 and PS5
For those experiencing frequent screen flickering on their PS4 or PS5 consoles, we recommend following the steps outlined below in sequence until the issue is resolved.
1. Use Another Graphics Mode
Occasionally, players may experience frame rate drops in certain games on the PS4 or PS5 consoles. To address this issue, consider experimenting with different graphics modes found in the game’s settings menu.
This can help determine if higher graphics settings are negatively impacting system performance. Adjusting the graphics mode or lowering the graphics quality to a certain degree may resolve these performance issues, depending on your preferences and requirements.
2. Reboot the PS4/PS5 Console
For those utilizing a PlayStation 4 or PlayStation 5 and experiencing performance-related problems, whether with the system or during gameplay, it is advisable to restart your console.
A reboot can often resolve various issues, including game crashes, lag, stuttering, and screen flickering. Sometimes, a straightforward restart is all it takes to restore optimal performance to your gaming experience.
3. Update PlayStation Firmware
To ensure optimal performance and prevent any graphical issues or lag on your PS4 or PS5, it is advisable to keep your system software up to date. You can easily install the latest updates by following these instructions:
- 1. Navigate to the Settings menu.
- 2. Select the System option.
- 3. Choose System Software, then click on System Software Update and Settings.
- 4. Finally, select Update System Software and opt for Update Using Internet.
4. Update No Man’s Sky
If it’s been a while since you last updated No Man’s Sky on your PlayStation 4 or PlayStation 5, it’s a good idea to ensure you have the latest version. Follow these instructions to update the game:
- 1. Power on your PS4 or PS5 console and access the Home screen.
- 2. Navigate to the main menu located at the top.
- 3. Select the Games tab.
- 4. Locate No Man’s Sky in the list and highlight it.
- 5. Press the Options button on your controller.
- 6. From the menu that appears, select “Check for Update” to see if any updates are available.
5. Power Cycle your PS4/PS5
Occasionally, minor system glitches or cache problems can lead to various issues such as errors, crashes, lag, or screen flickering. A simple solution to enhance your console’s performance is to perform a power cycle, which effectively clears any temporary cache or glitches.
To do this, follow these steps:
- 1. Begin by completely shutting down your console.
- 2. Disconnect the power cable from the back of the unit.
- 3. Wait for approximately 30 seconds before reconnecting the power cable.
- 4. Finally, power on your PS4 or PS5 and check if the issues persist.
This process can often resolve temporary performance problems.
6. Keep PS4/PS5 in a well-ventilated area
In certain situations, your PS4 or PS5 might experience performance issues or game lag due to overheating.
One common culprit is inadequate air circulation in the room, which can lead to increased stress on the hardware and negatively impact your gaming experience. To determine if overheating is a problem, it’s essential to place your console in a space with good ventilation.
Ensuring that your gaming setup has proper airflow and is located in a cooler environment can significantly enhance the performance of your PS4 or PS5.
Avoid positioning the console in cramped spaces or exposing it to direct sunlight, as these conditions can lead to overheating and disrupt your gameplay.
7. Check your TV or Monitor
One potential factor contributing to lag in No Man’s Sky on the PS4 or PS5 could be related to your television or monitor’s screen refresh rate. It’s possible that a temporary glitch or a mismatch in the refresh rate settings on the console could be causing these performance issues.
8. Check the HDMI port
It’s advisable to thoroughly inspect the HDMI ports on both your console and display device, as even minor misalignments or dust accumulation can lead to connectivity problems.
To address this, carefully disconnect the HDMI cable and use compressed air to blow out any debris from the ports. This simple maintenance step can help ensure a stable connection.
9. Check the Free Hard Drive Space
Insufficient hard drive space can lead to difficulties when launching applications, in addition to problems such as glitches, slow loading times, lag, and graphical errors.
It’s essential to verify the amount of free storage available on your hard drive before drawing any conclusions about these issues.
If you find that your available storage is critically low, consider removing unneeded games or applications from your PlayStation console. After doing so, reassess whether the screen tearing problem persists.
10. Eject the Game Disc and Gently Clean It
For those utilizing the disc version of the PlayStation console, maintaining the integrity of physical discs can be challenging. Scratches, physical damage, and dust can significantly affect both the disc’s condition and your overall gaming experience.
To help preserve your discs, it’s advisable to carefully remove the game disc and use a microfiber cloth to gently wipe away any smudges or dirt. After cleaning, reinsert the disc to see if the issue has been resolved.
11. Try Playing Another Game on PS4/PS5
Occasionally, PlayStation games may experience performance issues, which can be disappointing for users.
\To troubleshoot, consider running a different game on your PS4 or PS5 to determine if the problem persists.
Alternatively, you may want to wait a while before attempting to play the original game again.
12. Clear No Man’s Sky Game Data
Clearing the saved game data on your console might resolve various issues related to launching or playing the game. Here’s a step-by-step guide on how to do this:
- 1. Navigate to the **Settings** menu.
- 2. Select **Application Saved Data Management**.
- 3. Choose one of the following options: **System Storage**, **Online Storage**, or **USB Storage**, and then click on **Delete**.
- 4. Find the game **No Man’s Sky** and either select the specific files you wish to remove or choose **Select All**.
- 5. Click on **Delete** and confirm your choice by selecting **OK**.
After completing these steps, restart your console to see if the flickering issue in No Man’s Sky on your PS4 or PS5 has been resolved.
13. Rebuild Database
Rebuilding the database on your PlayStation console can effectively address various issues or errors you may encounter. Here’s how you can do it:
1. **Power Down: Start by turning off your console completely. Disconnect the power cable and wait for approximately 2 to 3 minutes to ensure a full reset.
2. **Reconnect Power: After the waiting period, plug the power cable back in and turn on the console. This action will help clear cached data automatically from the system.
3. **Check the Game: Once the console is powered on, check if the issues with the game No Man’s Sky: Stay Human have been resolved. If the problem persists, you can proceed to the next steps.
4. **Enter Safe Mode: Press and hold the Power button on your PlayStation console. Keep holding it down until you hear two beeps; the second beep will occur after about seven seconds.
5. **Connect Your Controller: Your console will now start in Safe Mode. Connect your controller using a USB cable and press the PS button to activate it.
6. **Select Rebuild Database: In the Safe Mode menu, you will see an option labeled “Rebuild Database.” Select this option and confirm that you want to proceed.
7. **Wait for the Process to Complete: The rebuilding process may take some time, depending on the size of your hard drive and the amount of data stored. Be patient while it works.
8. **Restart the Console: Once the rebuilding is complete, simply restart your console in the usual manner.
Following these steps should help resolve any ongoing issues with your console and improve its overall performance.
14. Hard Reset your Console
If you’re experiencing system glitches or cache-related issues with your game, a hard reset of your PlayStation 4 or PlayStation 5 could help resolve these problems. Here’s how to perform a hard reset:
- 1. Start by powering off your PlayStation console completely.
- 2. Once it’s off, press and hold the Power button. Keep holding it until you hear two beeps, which should occur within a few seconds.
- 3. After this, you will be presented with two reset options.
- 4. Choose the appropriate option to initiate the reset process for your console.
- 5. Allow some time for the reset to finish, and afterwards, remember to log back into your PlayStation account.
- 6. Finally, reinstall the No Man’s Sky game and attempt to launch it again to see if the issues have been resolved.
15. Don’t Put in Rest Mode
Here’s an additional tip: Avoid putting your console into rest mode, as this can lead to glitches or cause the system to enter rest mode unexpectedly. To ensure a smooth gaming experience, refrain from using rest mode during your gaming sessions. Here’s how to adjust the settings:
- 1. Navigate to the Settings menu on your PS5.
- 2. Click on the Power Saving option.
- 3. Choose “Set Time Until PS4/PS5 Enters Rest Mode.”
- 4. Select “Don’t Put in Rest Mode.”
- 5. Finally, restart your console to apply these changes.
By following these steps, you can help maintain optimal performance while playing.
Fix: No Man’s Sky Screen Tearing on Xbox Consoles
If you’re using the Xbox gaming console and facing the screen tearing issue with the No Man’s Sky game then make sure to follow the methods below.
1. Check System Updates
Before exploring any alternative solutions, it’s crucial to first check for system updates on your Xbox console, as running an outdated version may lead to screen-related problems. Here’s how to check for updates:
- 1. Press the Home button on your Xbox to access the Dashboard.
- 2. Navigate to the bottom of the menu and select Settings.
- 3. Click on All Settings.
- 4. Go to System and then choose Updates.
- 5. If an update is available, select Update Console and follow the on-screen instructions to complete the process.
- 6. After the update is finished, be sure to restart your console to ensure all changes take effect.
2. Update No Man’s Sky
To prevent any potential issues with your game files, it’s important to ensure that your console is running the latest version of the game. Outdated or corrupted files can lead to various problems. Here’s how to check for updates:
1. Navigate to the “My Games and Apps” section in your Dashboard menu.
2. Select “Manage,” then proceed to “Updates.”
3. If there are any updates available for your No Man’s Sky game, you will find them listed here.
4. Choose the update you want to install and press the A button on your controller to initiate the update process.
Additionally, for a smoother experience in the future, consider setting your console to automatically update your games.
You can do this by going to the Settings page, selecting “System,” and then choosing “Updates.” This way, your games will update automatically whenever your console is connected to the internet.
3. Power Cycle your Xbox Console
It’s important to consider performing a power cycle on your Xbox console to address any potential issues related to device firmware or temporary glitches. Simply restarting the console may not be sufficient, as a power cycle is often necessary to effectively clear any cache data or resolve minor malfunctions. Here’s how to execute a power cycle:
- 1. Turn off your Xbox console.
- 2. Disconnect the power cable from both the console and the electrical outlet.
- 3. Wait approximately 30 seconds before reconnecting the power cable.
- 4. Finally, power on the Xbox console and check if the screen flickering problem has been resolved.
This method can help refresh the system and potentially eliminate any persisting display issues.
4. Reinstall the Game
For optimal performance of No Man’s Sky on your Xbox console, consider uninstalling and then reinstalling the game. Here’s how to do it step by step:
- 1. Start by pressing the Xbox button on your controller to access the Guide menu.
- 2. Navigate to **My Games & Apps**, then select **See All** and proceed to **Games**.
- 3. Locate the **Ready to Install** tab and click on **Queue**.
- 4. Find No Man’s Sky in the list of games available for reinstallation.
- 5. Press the Menu button on your controller to access additional options.
- 6. Choose **Manage Game & Add-ons** or **Manage App** from the menu.
- 7. Select No Man’s Sky and then opt for **Uninstall All**.
- 8. Confirm your choice by selecting **Uninstall All** once more.
- 9. Allow the uninstallation process to finish completely.
- 10. Restart your console to ensure all changes are applied.
- 11. After the reboot, press the Xbox button again to return to the Guide menu.
- 12. Go back to **My Games & Apps**, click on **See All**, and then navigate to **Games**.
- 13. In the **Ready to Install** section, find No Man’s Sky and click **Install**.
- 14. Wait for the installation to complete, and then restart your console once again.
Following these steps should help resolve any game-related issues you may be experiencing.
5. Reset the Console
If the previous troubleshooting methods haven’t resolved your issue, you can manually reset your console by following these steps. This process can effectively eliminate system glitches or cache data problems. Here’s how to proceed:
- 1. Press the Xbox button on your controller to access the Guide menu.
- 2. Navigate to Profile & system, then select Settings.
- 3. Click on System, then go to Console info.
- 4. Choose the option to Reset console.
- 5. You will see a prompt asking, “Reset your console?” Here, select “Reset and remove everything.” Please note that this action will erase all user data, including accounts, saved games, settings, and all installed applications and games.
- 6. While there’s an option to “Reset and keep my games & apps,” this may not effectively resolve your issue in most situations.
- 7. After making your selection, your Xbox console will begin the process of deleting data and resetting to factory defaults.
- 8. Once the process is complete, restart your console.
That’s all there is to it! We hope this guide has been helpful for you. If you have any further questions, feel free to leave a comment below.
No Man’s Sky Crashing or Not Loading on Nintendo Switch: How to FIX
No Man’s Sky Keep Crashing on Steam Deck: How to FIX
No Man’s Sky Stuttering, Lags, or Freezing on Steam Deck: How to FIX