Ghost of Yotei Sound Not Working / Low Volume / Audio Cutting Out: If you’re experiencing sound issues in Ghost of Yōtei (no audio, low volume, audio cutting in and out), here’s a detailed guide to diagnosing and fixing it.
Because Ghost of Yōtei is (currently) a PS5 game, many of these fixes will be console-centric — but if you’re using a capture card, external audio system, or TV/receiver, some PC‑style checks may also apply.
What We Know About Audio Options in Ghost of Yōtei
Before jumping into fixes, here are the audio settings that are present in the game:
-
Under Audio settings:
-
Audio Output (controlled by system software) Game8+1
-
Midnight Mode — this reduces dynamic range (i.e. makes loud sounds quieter, quieter sounds louder) Access-Ability+1
-
Sliders for Dialogue Volume, Music Volume, SFX Volume, Cutscene Volume Game8+1
-
Controller Audio option (for audio tied to controller speaker) Deltia’s Gaming
-
These confirm that the game allows you to tweak volumes and has a “midnight mode” (often useful in quiet environments). Access-Ability+1
Also: the Day One patch (version 1.006) included audio fixes (especially for impact sound effects matching surface types) — which suggests that some audio bugs已有 recognition by the developers. Insider Gaming+2Beebom+2
Given that, some audio problems may already be partially addressed by updates; others may stem from your system or hardware setup.
Possible Causes of Sound/Audio Problems & Symptoms
Here are reasons why audio might fail, cut out, or be too quiet:
| Cause | Symptom | Relevance in Ghost of Yōtei |
|---|---|---|
| Incorrect audio routing / output setting | Sound plays through wrong output, or no sound through TV/receiver | The “Audio Output” is controlled by system software. If your PS5 or TV routing is misconfigured, you may get no sound. |
| Midnight Mode / dynamic range settings | Loud effects are too quiet; quiet dialogue lost in ambient noise | If Midnight Mode is enabled, it compresses the dynamic range — you may lose “punch” in sound peaks |
| Hardware / cable issue | No sound or intermittent audio | Faulty HDMI cable, loose connection, or audio hardware malfunction can cause dropouts |
| TV / receiver / AV settings | Volume low, audio passthrough issues, audio lag | If your TV or receiver does custom audio processing (Dolby, PCM, surround modes), some channels or dynamic levels may be mis‑handled |
| PS5 system / firmware bug | Audio cutting out or no sound in certain scenes / menus | Since it’s a new game, some PS5 firmware or system software interactions might cause weird behavior |
| Game bug / patch missing | Certain sound effects missing, volume imbalanced, audio mis‑sync | The dev patch notes included audio fixes, but not all issues may be covered yet |
| Controller speaker or vibration audio | Some effects tied to DualSense might stop or be disabled | Controller audio is a setting; if disabled or buggy, some sounds might vanish |
| External audio / capture card interference | If you’re using external mixers, card, or HDMI splitting, signal loss / audio dropouts may happen | External hardware can introduce latency or dropouts |
Given these, let’s go through a checklist of fixes from easy to more complex.
Step‑by‑Step Fixes
Try each one, testing audio after each step, to see which fix resolves your problem.
1. Check & Adjust In‑Game Audio Settings
-
Go to the game’s Audio / Settings menu.
-
Ensure Dialogue Volume, SFX Volume, Music Volume, Cutscene Volume are all high (e.g. 100) or at decent levels. Game8+1
-
Check if Midnight Mode is enabled. If yes, try disabling it — this may restore dynamic range and make sound peaks more audible. Access-Ability+1
-
Enable Controller Audio if you want sounds coming from the DualSense speaker (if supported). Deltia’s Gaming
-
Reset audio settings to default (if there is a “reset” or “restore defaults” button) in case something got misadjusted.
2. Update Game & System Software / Patches
-
Make sure Ghost of Yōtei is updated to the latest version (the Day One patch 1.006 includes audio fixes). Insider Gaming+2GameSpot+2
-
Update your PS5 system software to the latest firmware.
-
If there are optional audio or system patches (e.g. for audio driver on PS5), make sure those are applied.
3. Check Physical Connections & Audio Hardware
-
If you’re using a TV or receiver, check that the HDMI or other audio cable is properly connected on both ends.
-
Try a different HDMI cable (one that supports audio well).
-
If your setup is: PS5 → AV Receiver → TV, try bypassing the receiver (PS5 → TV) to see if audio returns.
-
If using external DAC, amplifier, soundbar, or capture card, temporarily disable or bypass them to isolate the problem.
4. Check TV / Receiver Audio Settings
-
On your TV or AV receiver, check sound mode: set to Stereo / PCM mode (rather than surround / passthrough) to test if simpler mode works better.
-
Disable any “sound enhancers” or audio modes (e.g. “night mode”, “dynamic compression”, “bass boost”) to see if they are interfering.
-
Ensure volume on TV / receiver is not muted or turned very low.
-
If you have an option for “HDMI Audio” format (e.g. bitstream, PCM), try switching between them.
5. Clear PS5 Cache / Rebuild Database
Sometimes system caches or database issues can interfere with audio or media:
-
Power off the PS5 fully (not in Rest Mode).
-
Boot into Safe Mode (holding the power button till you hear two beeps).
-
Use the “Clear Cache and Rebuild Database” option.
-
Restart the console and test audio again.
6. Test whether the issue is scene‑specific or general
-
Does audio fail all the time, or only in cutscenes, menus, or certain areas?
-
If audio cuts out only in specific contexts (e.g. cutscenes, transitions), that suggests a bug in game logic.
-
Try switching audio language (English / Japanese) to see if one has problems. Because the game supports both. Push Square+2tvl.network+2
7. Use “Safe” Audio Output / Simpler Mode
-
Configure output to a simpler mode (e.g. stereo) even if your system supports surround.
-
If your system supports 5.1/7.1 or Dolby Atmos etc., try disabling those or switching to PCM.
8. Disable Midnight Mode / Dynamic Compression Features
-
Since the game offers Midnight Mode, which compresses dynamic audio ranges, disabling it may help with faint or missing audio. Access-Ability+1
-
Also check your TV or receiver’s “night mode” or “audience intelligibility” settings — sometimes these reduce loudness of effects to avoid startling spikes.
9. Monitor Firmware / Future Patches
-
Keep an eye on patch notes — more audio fixes may come in later updates.
-
Report the issue (with specific cases) to the developers or support so they can replicate.
10. As Last Resort: Reinstall / Reset Configurations
-
If nothing else works, uninstall and reinstall the game (back up your save).
-
This can fix corrupted audio assets.
-
After reinstalling, avoid altering audio settings until verifying default sound works.
Borderlands 4 Audio Not Working or Crackling Sound Issue: How to FIX
Silent Hill f Sound Not Working / Low Volume / Audio Cutting Out: How to FIX
Overwatch 2 Audio Not Working or Sound Cutting Out: How to FIX
Example: Diagnosing an Audio Cutout Case
Suppose your audio works normally in menu music, but as soon as a cutscene starts, sound drops out or gets extremely quiet. You might try:
-
Disable Midnight Mode.
-
Switch the TV/receiver to simple stereo mode.
-
Bypass receiver, connect PS5 directly to TV.
-
Clear PS5 cache / rebuild database.
-
If switching audio language helps, that suggests some audio track is glitching.
Or, if sound never works, even in menu:
-
Check cable / hardware routing first (HDMI, AV receiver)
-
Check that PS5 is outputting audio (go to PS5 settings → Sound → Output)
-
Apply system patch and rebuild database
FAQ — Ghost of Yōtei Audio Issues
Q1: Why is the game’s audio very quiet compared to other games?
A: You might have Midnight Mode enabled (which squashes loud sounds) or your TV / receiver is applying dynamic compression. Also, check audio sliders and your output settings.
Q2: Some sound effects are missing (e.g. impact on surfaces). Is that normal?
A: The Day One patch includes fixes to allow impact sounds to correctly match surface types Insider Gaming+1. You should ensure you’re on version 1.006 or later.
Q3: Audio cuts out during cutscenes or transitions. Why?
A: Could be a bug in how audio tracks are loaded, or switching between audio sources. Using “clear cache / rebuild database” sometimes helps. Also, check if the problem occurs only in a specific audio language.
Q4: I don’t hear sound through my receiver, but TV speakers still output. What’s wrong?
A: The issue is likely in your AV receiver settings (incorrect audio mode, passthrough, or HDMI handling). Try forcing PCM stereo or disabling passthrough until audio returns.
Q5: Does the DualSense controller audio matter, and could that break audio?
A: Yes — if “Controller Audio” is disabled, any effects meant for the controller speaker will not play. Enable controller audio in settings to restore those sound cues.
Q6: Will upcoming patches fix lingering audio bugs?
A: Very possibly. Because the game is new and the devs already included audio fixes in Day One patch, continuing issues might be addressed in future updates.
If you like, I can walk you through debugging your specific setup (PS5 → TV → receiver, etc.) to isolate why audio isn’t working for you. Do you want me to do that?